华仪耐压绝缘测试仪 HY-7130 东莞弘浦仪器科技有限公司

查看大图

产品名称：华仪耐压绝缘测试仪
产品型号：HY-7130
产品厂商：台湾华仪
产品文档：

你添加了1件商品查看购物车

7130 产品介绍 7130华仪耐压绝缘测试仪大尺寸128 x 64 LCD 显示器，可完整呈现测试结果，提高判读效率；体积小、重量轻 (10kg)，超高性价比，适合简易高压测试应用。7100 系列提供多台联机同步测试功能，亦可透过远程控制 (RS-485 或PLC 远程控制接口)，满足自动化测试，提高生产效率。

详情介绍：

HY-7130华仪耐压绝缘测试仪

产品特点

直流耐压测试具有** Discharge 直流高压快速放电装置，避免被测物上残余电压，造成使用人员触电危险
** Smart GFI 智慧防高压触电线路 (169000)，随时侦测回路，杜绝触电伤害，保障人员**
可进行多达100台联机控制，同时输出，快速测试
搭配7314 接地阻抗测试器，可同时进行耐压及接地测试，缩短测试时间
开机智能检测功能，自动确认仪器输出正常，确保测试的可靠度
校正及预警时间设定功能，提醒用户定期校正，确保测试质量
键盘锁定 (Key Lock) 功能，保护记忆组数据，避免误触按键所造成的危害

三种测试功能可供选择：ACW, DCW, IR

大型128×64 Graphic LCD 显示器

单机可与7315接地阻抗测试器连结符合标准19英吋仪器架

可同时进行100台的联机测试

内建10组程序记忆、每一组3个测试步骤可进行程序记忆步骤的连结测试

**快速放电功能，可于0.2秒将被测物上的电能放完，确保人员**

**防高压触电功能，当人体误触时可立即中断输出

开机自我检测功能的测试，可于测试前进行判定各项测试功能是否正常

前面板软件输入校正

时间与日期的设定，可设定校正时间及预警时间提醒使用者

内建PLC Remote遥控界面

键盘锁定功能

**锁定功能

体积小、重量轻

7100系列型号选择：

7130 AC Withstand VoltageTester
7132 AC Withstand Voltage / Insulation Resistance Tester
7140 AC/DC Withstand Voltage Tester
7142 AC/DC Withstand Voltage / Insulation Resistance Tester

台湾华仪 7130 7100系列耐压测试仪技术参数

PECIFICATIONS

MODEL 7130 7132 7140 7142

AC WITHSTAND VOLTAGE

Output Rating 5KVAC/20mA

Range

Resolution

Accuracy

Output Voltage, KVAC
0-5.00

0.01

±（2% of setting + 5V）

Output Frequency 50Hz/60Hz ±100ppm, User Selection

Output Waveform Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5

Output Regulation ± (1% of output + 5V), From no load to full load

SETTINGS

Max-Limit AC Current, mA
0 - 20.00

0.01

±（2% of setting + 2counts）

Min-Limit AC Current, mA
0 - 9.999

0.001

±（2% of setting + 2counts）

Ramp Up Time, second
0.1 - 999.9

0.1

±（0.1% + 0.05sec）

Ramp Down Time, second
0 - 999.9

0.1

Dwell Time, second
0, 0.3 - 999.9
(0=continuous)

0.1

Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)

DC WITHSTAND VOLTAGE (7140,7142 ONLY)

Output Rating 6KVDC/7500μA

Output Voltage, KVDC
0 - 6.00

0.01

±（2% of setting + 5V）

Output Ripple <5%（6KV/7500μA at Resistive Load）

SETTINGS

Max-Limit DC Current, μA
0 - 7500

1

±（2% of setting + 2counts）

Min-Limit DC Current, μA
0 - 999.9

0.1

±（2% of setting + 2counts）

Ramp Up Time, second
0.1 - 999.9

0.1

±（0.1% + 0.05sec）

Ramp Down Time, second
0, 1.0 - 999.9

0.1

Dwell Time, second
0, 0.4 - 999.9
(0=continuous)

0.1

Arc Detection 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)

Discharge Time ≦ 200 msec

INSULATION RESISTANCE (7132,7142 ONLY)

Output Rating 1KVDC/9999MΩ

Output Voltage, DCV
30 - 1000

10

±（2% of setting + 5V）

SETTINGS

Max-Limit Resistance, MΩ
0, 1 - 9999 (0=OFF)

1

±（2% of setting+2counts）at 500-1000VDC,
1 -1000 MΩ

Min-Limit Resistance, MΩ
1 - 9999

1
±（5% of setting+2counts）at 500-1000VDC,
1000 -9999 MΩ

±（8% of setting+2counts）at 30-500VDC,
1 -1000 MΩ

Ramp Up Time, second
0.1 - 999.9

0.1
±（0.1% + 0.05sec）

Ramp Down Time, second
0, 1.0 - 999.9

0.1

Delay Time, second
0, 0.5 - 999.9
(0=continuous)

0.1

MEASUREMENT

AC/DC Voltage, KV
0 - 6.00

0.01

±（1.5% of reading + 1count）

DC Voltage, V (IR only)
30 - 1000

1

±（1.5% of reading + 5V）

AC Current, mA
0 - 3.500

0.001

±（2% of reading + 2counts）

3.00 - 20.00

0.01

DC Current, μA
0 - 350.0

0.1

±（2% of reading + 2counts）

DC Current, mA
0.300 - 3.500

0.001

3.00 - 7.50

0.01

Resistance, , MΩ
1 - 9999
(Auto Range)

0.001
0.01
0.1
1

±（2% of setting+2counts）at 500-1000VDC,
1 -1000 MΩ
±（5% of setting+2counts）at 500-1000VDC,
1000 -9999 MΩ
±（8% of setting+2counts）at 30-500VDC,
1 -1000 MΩ

GENERAL

Input Voltage AC 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A

PLC Remote Control Input : Test , Reset , Memory1.2.3 , Interlock

Output : Pass , Fail , Processing , Reset-Out

Interface(Option) RS485 Interface

Memory 10 memories, 3 steps/memory

Graphic Display 128×64 Graphic LCD

Safety Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS

Key Lock To prevent unauthorized alteration of the test Parameters

Calibration Build-in software and external calibrated meters

Verification Build-in software driven verification menu to test fault detection circuits

Alarm Volume Setting Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.

Environment 0-40℃, 20-80%RH

Dimension/Net Weight 215mm(W)×89mm(H)×370mm(D)/ 10Kg

STANDARD ACCESSORIES

Power Cord(10A) ×1

Fuses ×2 (Including a spare contained in the fuse holder)

Interlock Disable Key(1505) ×1

Hipot Test Lead ,1.5m(1101) ×1

Hipot Return Lead ,1.8m(1102) ×1

*product specifications are subject to change without notice.

PECIFICATIONS
MODEL	7130	7132	7140	7142
AC WITHSTAND VOLTAGE
Output Rating	5KVAC/20mA
	Range	Resolution	Accuracy
Output Voltage, KVAC	0-5.00	0.01	±（2% of setting + 5V）
Output Frequency	50Hz/60Hz ±100ppm, User Selection
Output Waveform	Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5
Output Regulation	± (1% of output + 5V), From no load to full load
SETTINGS
Max-Limit AC Current, mA	0 - 20.00	0.01	±（2% of setting + 2counts）
Min-Limit AC Current, mA	0 - 9.999	0.001	±（2% of setting + 2counts）
Ramp Up Time, second	0.1 - 999.9	0.1	±（0.1% + 0.05sec）
Ramp Down Time, second	0 - 999.9	0.1
Dwell Time, second	0, 0.3 - 999.9 (0=continuous)	0.1
Arc Detection	0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
DC WITHSTAND VOLTAGE (7140,7142 ONLY)
Output Rating	6KVDC/7500μA
Output Voltage, KVDC	0 - 6.00	0.01	±（2% of setting + 5V）
Output Ripple	<5%（6KV/7500μA at Resistive Load）
SETTINGS
Max-Limit DC Current, μA	0 - 7500	1	±（2% of setting + 2counts）
Min-Limit DC Current, μA	0 - 999.9	0.1	±（2% of setting + 2counts）
Ramp Up Time, second	0.1 - 999.9	0.1	±（0.1% + 0.05sec）
Ramp Down Time, second	0, 1.0 - 999.9	0.1
Dwell Time, second	0, 0.4 - 999.9 (0=continuous)	0.1
Arc Detection	0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity)
Discharge Time	≦ 200 msec
INSULATION RESISTANCE (7132,7142 ONLY)
Output Rating	1KVDC/9999MΩ
Output Voltage, DCV	30 - 1000	10	±（2% of setting + 5V）
SETTINGS
Max-Limit Resistance, MΩ	0, 1 - 9999 (0=OFF)	1	±（2% of setting+2counts）at 500-1000VDC, 1 -1000 MΩ
Min-Limit Resistance, MΩ	1 - 9999	1	±（5% of setting+2counts）at 500-1000VDC, 1000 -9999 MΩ
			±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ
Ramp Up Time, second	0.1 - 999.9	0.1	±（0.1% + 0.05sec）
Ramp Down Time, second	0, 1.0 - 999.9	0.1
Delay Time, second	0, 0.5 - 999.9 (0=continuous)	0.1
MEASUREMENT
AC/DC Voltage, KV	0 - 6.00	0.01	±（1.5% of reading + 1count）
DC Voltage, V (IR only)	30 - 1000	1	±（1.5% of reading + 5V）
AC Current, mA	0 - 3.500	0.001	±（2% of reading + 2counts）
	3.00 - 20.00	0.01
DC Current, μA	0 - 350.0	0.1	±（2% of reading + 2counts）
DC Current, mA	0.300 - 3.500	0.001
	3.00 - 7.50	0.01
Resistance, , MΩ	1 - 9999 (Auto Range)	0.001 0.01 0.1 1	±（2% of setting+2counts）at 500-1000VDC, 1 -1000 MΩ ±（5% of setting+2counts）at 500-1000VDC, 1000 -9999 MΩ ±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ
GENERAL
Input Voltage AC	115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A
PLC Remote Control	Input : Test , Reset , Memory1.2.3 , Interlock
	Output : Pass , Fail , Processing , Reset-Out
Interface(Option)	RS485 Interface
Memory	10 memories, 3 steps/memory
Graphic Display	128×64 Graphic LCD
Safety	Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS
Key Lock	To prevent unauthorized alteration of the test Parameters
Calibration	Build-in software and external calibrated meters
Verification	Build-in software driven verification menu to test fault detection circuits
Alarm Volume Setting	Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
Environment	0-40℃, 20-80%RH
Dimension/Net Weight	215mm(W)×89mm(H)×370mm(D)/ 10Kg
STANDARD ACCESSORIES
Power Cord(10A)	×1
Fuses	×2 (Including a spare contained in the fuse holder)
Interlock Disable Key(1505)	×1
Hipot Test Lead ,1.5m(1101)	×1
Hipot Return Lead ,1.8m(1102)	×1
*product specifications are subject to change without notice.

产品名称：华仪耐压绝缘测试仪